More Free photoshop tutorials,resources and news

Here, I m going to tell you, how to make a sofa couch in 3d max.
I have used following techniques in making of this tutorial.

[1]Firstly, create a plane of this size in the top view port.

[2]Go to the Extended primitive, took chamfer box in the front view port of this size.

[3]Copy the chamfer box.

[4]Place it like this.

[5]Then go to the compound object, took BOOLEAN and apply it.

[6]This is your image.

[7]Convert it into Editable poly.

[8]Then go to the modifier panel and pick FFD 4×4x4 modifier and apply it.

[9]Select the lattice and adjust it like this.

[10] Again take a chamfer box in the front view port and copy it.

[11]Select both the chamfer box and again copy it and place it like this.

[12]Select the chamfer boxes and apply FFD 4×4x 4 modifiers as done before.

[13]Again do the same.

[14]Place it like this.

[15]Select the whole object, and press M adds a good map in the diffuse panel.

[16]Now select the plane and press Modifies color as black, open map, click on refraction
select ray trace and apply it.

[17]This is final image.

3d model converter
3d model creator
3d model design

Here I m going to tell you, how to make a 3ds max convert torus knot ribbon tutorial.

I have used following techniques in making of this tutorial.

[1]Create a plane in the top view port.

[2]Then go to the Extended primitive and create a Torus knot and do the following settings.
{Remember,Eccentricity should be 0.45}.

[3]Select the knot and place it like this.

[4]Then open the modifier panel or press M,take diffuse color as black And adjust the parameters.

[5]Select the torus knot take templates as plastic and add a good map in the diffuse panel like this.

[6]This is the final image.

3d model converter
3d model creator
3d model design

Today, I going to teach you, how to make a realistic table cloth cover in 3ds max.
I have used cloth making techniques in making of this tutorial.

[1]First, take a cylinder of this size.

[2]Go to the modifier panel and select TAPER modifier and do the following settings.

[3]You have a shape like this.

[4]Then take a cylinder of this size.

[5]Place it like this.

[6]Take line and draw a shape like this.

[7]Go to the modifier panel and select Garment Maker modifier.

[8]Adjust it like this.

[9]Again go to the modifier panel and select cloth modifier.

[10]Open cloth modifier properties and hit object properties and do the following settings.

[11]click on the ADD OBJECT and select line, then add cylinder02.

[12]Then select line one and hit OK.

[13]Then hit SIMULATE.

[14]You will have a shape like this.

[15]This is your image in perspective view.

[16]Select the cloth, Press M and add good cloth texture to it.

[17]Then select the cylinder and add good wood texture like this.

[18]Take a plane in the top view port.

[19]Put some Omni light.

[20]This is the final result.

3d model converter
3d model creator
3d model design

Here, I am going to tell you,how to make a 3d-model wooden round table tutorials in 3d max.
I have used following techniques in making of this tutorial.

[1]First, create a cylinder in the top view port of this size.

[2]Then create a box of this size in the top view port.

[3]Got to the modifier panel and add BEND modifier and adjust it like this.

[4]Then hit MIRROR and copy on ZX axis.

[5]Again do the same thing but in XY axis.

[6]Adjust it like this.

[7]Then go to the modifier panel and add mesh smooth.

[8]Create a sphere in the top view port of this size.

[9]Then another cylinder of this size.

[10]your image will look like this.

[11]This is the final result.

3d model converter
3d model creator
3d model design

Here, I will show you how to make a 3d model max studio pencil tutorial in 3D max.

I have used following techniques in making of this tutorial.

[1]First, create a plane in the top view port.

[2]Create a cylinder in the front view port with 5 sides, radius: 6, heigth: 153.

[3]Again create a cone in the front view port as shown in the image.

[4]Then select the cone copy it one time.

[5]And place it like this.

[6]Select the plane, press M diffuse color as black, specular lavel:123, glossiness:27 and add ray trace to
refractive index and apply.

[7]Now, select the first cone press M, diffuse color as light brown, specular lavel:13, glossiness:29.And add a good wood map.

[8]Select the whole cylinder add a map to the diffuse color like this.

[9]This is your good 3d pencil.

3d model converter
3d model creator
3d model design

Here, I will show you how to make a 3d model ice donuts max studio tutorial in 3d max.

I have used following techniques in making of this tutorial.

[1]First, create a plane in the top view port.

[2]Create a torus knot in the front view port of this size.

[3]Then copy it one times.

[4]Adjust the position of the knot by tranform tool.

[5]Place it like this.

[6]Now,press M and adjust it like this as shown below.

[7]Select the second knot again press M and do the same.

[8]This is the final image.

3d model converter
3d model creator
3d model design

Here, I am going to tell you, how to make a 3d medical syringe in 3ds max.
I have used following techniques in making of this tutorial.

[1]first take a cylinder of this size in the top view port.

[2]Then convert it into Editable poly.

[3]Select the front polygon and hit insert polygon.

[4]Then hit on extrude polygon by extrusion height 6.

[5]Again hit insert polygon by insert amount 3.2.

[6]Then hit bevel do the adjustments.

[7]Again bevel once more.

[8]Extrude one more time.

[9]This is the image.

[10]Again insert a polygon.

[11]Extrude the polygon once more.

[12]Again bevel the polygon by this value.

[13]Extrude the polygon again.

[14]Bevel the polygon again.

[15]Your image will look like this.

[16]Select the polygon like this and open modifier panel and select mesh smooth.

[17]Select middle part by polygon and press M and do the following settings.

[18]Select the nip and set as grey in color.

[19]Select the back part of the syringe and take diffuse color as black.

[20]This is the final result.

3d model converter
3d model creator
3d model design

Here, I am going to tell you, how to make a 3d model dynamo tutorial in 3ds max.
I have used spline techniques in making of this tutorial.

[1]First, go to the shapes and select rectangle of this size.

[2]Go to modifier panel and select extrude modifier and apply it.

[3]You will have a shape like this.

[4]Then convert it into Editable poly.

[5]By switching to the polygon mode, select the bottom view and select the polygon like this.

[6]Hit on bevel by this amount and hit OK.

[7]Then select the top polygon.

[8]Hit bevel again by this amount.’

[9]Then extrude by height 4.

[10]You will have a shape like this.

[11]Then select the line tool and draw a figure like this.

[12]Go to the modifier panel and take LATHE modifier and apply it.

[13]This is your shape after LATHE.

[14]Again add one more modifier that is shell modifier.

[15]Also add mesh smooth modifier.

[16]Then select line and draw a shape like this.

[17]Then add LATHE modifier.

[18]Again add Shell modifier.

[19]Then mesh smooth and you have a shape like this.

[20]Again take line and draw a figure like this.

[21]Then add extrude modifier by this amount.

[22]One more time take a line and draw like this.

[23]Apply LATHE modifier.

[24]You have a shape like this.

[25]Then add both shell and mesh smooth modifiers.

[26]Then take a box of this size.

[27]Then go to the compound objects, select Boolean and subtract B from A.

[28]Again take a box of this size.

[29]Copy it one time.

[30]Place the box like this.

[31]Then go to the compound objects, select Boolean and subtract B from A.

[32]Then take a cylinder and place it like this.

[33]Go to the modifier panel and mesh smooth and apply it.

[34]Again take cylinder of this size and copy it three times.

[35]Place all of them like this.

[36]Take a hemi-sphere of this size and put it like this.

[37]Your model will look like this.

[38]Press M and add a wood good map on it.

[39]Select the steel part and add a texture like this.

[40]Select the handle and take diffuse color as shiny black.

[41]Take a plane.

[42]This is the final model.

3d model converter
3d model creator
3d model design

Here,i am going to teach you, how to make a 3d model mathematical compass tutorial in 3d max.
I have used following techniques in making of this tutorial.

[1]First go to the line,and create a shape like this.

[2]Then go to the modifier panel and select extrude and apply it.

[3]Then create a box of this size.

[4]Go the compound objects and select Boolean and appy it.

[5]Your shape will look like this.

[6]Then create another box of this size and hit mirror and do like this.

[7]Place them like this.

[8]Then select the boxes and convert it into editable poly,switch edges mode and hit connect.

[9]After that switch to the polygon mode and select the polygon like this.

[10]Then hit on bevel do the following adjustments.

[11]Hit insert polygon and do the following settings.

[12]Then take tube of this size and again hit mirror and do like this.

[13]Go to the shapes and take NGon and apply extrude modifier on it.

[14]Then create a cylinder of this size and place it like this.

[15]Again create another cylinder of this size and place it like this.

[16]Then create a plane.

[17]Create a cylinder of this size.

[18]Now, create a cone and place it like this.

[19]Copy the whole pencil one times and place it like this.

[20]Press M and turn the pencil nip as black.

[21]Select upper cap of compass and turn it into black.

[22]Then select the legs of the compass and turn them into in shiny white.

[23]This is the final result.

3d model converter
3d model creator
3d model design

Here I will teach you how to create a perfume glass bottle model using 3dsmax studio.
I have used following techniques in this 3ds max tutorial.
Glass Effect and Gradient material effect
[1]-First of all you will press (ctrl+N) now you will see the new window is open
Now click on the Geometry > Standard primitives > Plane and Using the following Setting
Create a plane in the front view

[2]-Now your image should be look this

[3]-Now click on the Geometry > Extended primitives > chamfer Box and Using the following Setting
Create a chamfer Box in the front view

[4]-Now your image should be look this

[5]-Now click on the Geometry > Standard primitives > Cylinder and Using the following Setting
Create a Cylinder in the front view

[6]-Now your image should be look this

[7]-Now click on the Geometry > Extended primitives > chamfer Box and Using the following Setting
Again create a chamfer Box in the front view

[8]-Now your image should be look this

[9]-Now click on the Geometry > Standard primitives > Cylinder and Using the following Setting
Create a Cylinder in the front view

[10]-Now your image should be look this

[11]-Apply Bend Modifier and use the following setting

[12]-Now your image should be look this

[13]-Click on the Light > Omni Use the following setting and set the omni at front of bottle

[14]-Now press the button (M) you will see the material window is open
Use the following setting a make material like this a image as shown below

[15]-Now press again the button (M) you will see the material window is open
Click on the diffuse button map and select Gradient Ramp default map in the Material/map Browser
Create a gradient like this

[16]-Now your material should be like this and assign to the cap

[17]-After assign the material now you will see the final image is ready press (f9) to see the preview of the image

3d model converter
3d model creator
3d model design